- The full article was originally published on Team Tekin -
Brake Minimum adjusts the minimum amount of brake the ESC will apply to the motor as soon as trigger brakes are engaged. The higher the value set, the stronger the initial brake power will be. This will also move where full brakes are at on the trigger, so if a setting higher than 0 is used, 100% brake signal is reached before 100% trigger throw
Brake Minimum can only be adjusted with the HotWire, so plugging in or connecting via Bluetooth is necessary to adjust this setting.
Check out the other videos from the ESC Programming video series by Tekin Clinic:
